Configuring Wireless Adapter Settings
18
PageWriter TC20 Wireless LAN Installation Instructions
5
Touch
OK
.
The
Wireless Information
tab
Status
field refreshes and should show that the cardiograph is
connected to the selected network and give an indication of signal strength.
6
To specify multiple networks to which the cardiograph can connect, repeat step 5 on
page 11 and the steps in this procedure as often as needed to configure the necessary set of
networks.
Configuration is complete. Proceed to “Step 4. Restarting the Cardiograph” on page 18.
Step 4. Restarting the Cardiograph
You must restart the cardiograph for the new wireless settings to be applied.
To restart the cardiograph
1
Press and hold down the On/Standby button (
) for five seconds to shut down the
cardiograph.
2
Press the power button again to restart the cardiograph.
The new wireless settings are applied and configuration is complete.
Summary of Contents for PageWriter TC20
Page 29: ......
