Philips Odea Go, Operation And Maintenance Manual

Page: 32 / 40

32
Problems Causes Solutions
The machine does not turn on. The machine is not connected to the
power source. Connect the machine to the power source.
7KHSOXJKDVQRWEHHQSOXJJHGLQWRWKH
EDFNRIWKHPDFKLQH ,QVHUWWKHSOXJLQWRWKHPDFKLQH¶VSRZHU
socket.
0DFKLQHLQVWDQGE\ 3UHVVWKHEUHZEXWWRQWRVWDUWWKHPDFKLQH
Coffee is not hot enough. The cups are cold. Warm the cups with hot water.
Hot water or steam is not dispensed. The hole of the steam wand is clogged. Clean the hole of the steam wand using a pin.
Coffee has little crema. 7KHFRIIHHEOHQGLVXQVXLWDEOHRUFRIIHH
is not freshly roasted.
&KDQJHFRIIHHEOHQG
The machine takes a long time to warm
up or the amount of water dispensed
from the wand is too little. 7KHPDFKLQHFLUFXLWLVREVWUXFWHGE\
OLPHVFDOHEXLOGXS Descale the machine.
7KHEUHZJURXSGRHVQRWFRPHRXW 7KHEUHZJURXSLVRXWRISODFH Turn the machine on. Close the service door.
7KHEUHZJURXSLVDXWRPDWLFDOO\SODFHGLQWKH
correct position.
Coffee grounds drawer is inserted.
5HPRYHWKHGUHJGUDZHU¿UVWWKHQWKHEUHZ
group.
7KHPDFKLQHJULQGVWKHFRIIHHEHDQVEXW
no coffee comes out.
(see note)
Water tank is empty. Fill the water tank and prime the circuit again.
Brew group is dirty.
&OHDQWKHEUHZJURXS
Circuit is not primed. 3ULPHWKHFLUFXLWDJDLQE\GLVSHQVLQJZDWHU
from the steam wand.
Rare event that occurs when the
machine is automatically adjusting the
dose. %UHZDIHZFRIIHHVDVGHVFULEHGLQWKH
manual.
.QREWRDGMXVWWKHTXDQWLW\RIFRIIHHSHU
cup is in wrong position.
7XUQWKHNQREFORFNZLVH
The coffee is too weak.
(see note)
Rare event that occurs when the
machine is automatically adjusting the
dose.
%UHZDIHZFRIIHHVDVGHVFULEHGLQWKH
manual.
&RIIHHLVEUHZHGVORZO\
(see note)
&RIIHHLVWRR¿QH &KDQJHFRIIHHEOHQG
Circuit is not primed.
3ULPHWKHFLUFXLWDJDLQE\GLVSHQVLQJZDWHU
from the spout.
Brew group dirty. &OHDQWKHEUHZJURXS
Coffee leaks out of the dispensing head. Dispensing head is clogged. Clean the dispensing holes with a soft cloth.
Brewing does not start.
&RIIHHEHDQKRSSHUFRYHULVLQZURQJ
position.
&RUUHFWO\SODFHWKHFRYHURQWKHFRIIHHEHDQ
KRSSHUDQGSUHVVLW¿UPO\
Note: If dealing with an initial start-up or if the coffee blend has been changed, a certain number of coffees must be
brewed in order to allow the machine to optimize the parameters.
Please contact the service center for any problems not covered in the above table or when the suggested solutions
do not solve the problem.
TROUBLESHOOTING