21
22
15 Disposable battery
16 Storage pouch
Preparing for use
Placing the batteries
1
To remove the battery compartment cover,
turn it clockwise until the setting indicator
(
%
) points to the ‘open’ indication.
2
Pull the battery compartment cover off the
handle.
3
Put the battery in the battery compartment.
Make sure the + and - poles of the battery point in
the right direction.
Note: The appliance runs on one R6 AA 1.5-volt battery
(included). Preferably use Philips alkaline batteries. A
new AA alkaline battery has an operating time of up to
2 hours.
4
Slide the battery compartment cover back
onto the handle.
AA
ENGLISH
5
Turn the battery compartment cover
anticlockwise until the setting indicator (
%
)
points to the ‘off’ indication (0).
To avoid damage due to battery leakage:
do not expose the appliance to direct sunlight.
-
do not expose the appliance to temperatures
-
higher than 35°C.
remove the battery if you are not going to use the
-
appliance for a month or more.
do not leave an empty battery in the appliance.
-
Attaching and detaching attachments
Note: The precision trimming head, precision shaving
head and nose/ear/eyebrow trimming head can all be
attached and detached in the same way.
1
To attach one of the attachments, align
the locking indicator with the ‘unlocked’
indication (black upward arrowhead) and
put the attachment on the handle. Then turn
the attachment clockwise until the locking
indicator points to the ‘locked’ indication (I).
2
To detach the attachment turn it anticlockwise
until the locking indicator points to the
‘unlocked’ indication (black upward
arrowhead). Then pull the attachment off the
handle.
Using the appliance
When you trim your beard for the fi rst time, be
careful and test the appliance on a small part of your
arm or leg. Do not move the trimmer too fast. Make
smooth and gentle movements.
ENGLISH
