Action Clean
Razor Head
Cleaner
HQ100
Instructions for use
IMPORTANT
SAFEGUARDS
When using your Action Clean Razor Head
Cleaner, basic safety precautions should always
be followed, including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE.
1.
Close supervision is necessary for any
appliance being used by or near children
or the disabled.
2.
Use this Razor Head Cleaner for its intended
household use as described in this manual.
Do not use attachments or other cleaning
solutions not recommended by Philips
Electronics North America Corporation.
3.
Never place this appliance on a soft surface,
such as a bed or a sofa, where solution may
spill. Do not tilt the unit.
4.
Do not overfill chamber with liquid.
5.
Do not rinse with water.
6.
Never operate this unit if it is not working
properly or if it has been dropped or dam-
aged. Return Razor Head Cleaner to an
Authorized Norelco Service Location for
examination and repair.
SAVE THESE
INSTRUCTIONS
If you need help, answers or
service, please call us at
1-800-243-3050
Features
•
For assistance or the Authorized Norelco
Service Location nearest you, call toll free:
1-800-243-3050
Authorized Service Location information is avail-
able 24 hours a day, 7 days a week.
Before using your new Action Clean Razor Head
Cleaner, it is important to follow the instruc-
tions below:
•
You do not need to remove cutters and combs
from Razor Head Assembly to clean them in the
Action Clean Razor Head Cleaner. The whole
assembly piece can be cleaned as a complete unit.
If you do remove cutters and combs be careful
not to interchange them as they are matched
sets.
If you do interchange cutters and
combs, the shaving performance may be
adversely affected for the next few shaves
until the blades reseat themselves.
•
Three Head Holder
•
Two Head Holder
•
Top
•
Action Cleaning
Chamber
For
Assistance
Important
•
Base
