User Manual
Philips MultiOne
© Philips Lighting B.V. 2014
Page 18 / 81
9.2.4
Managing groups
Once all the devices in the DALI network are
commissioned, i.e. have a unique short address, it is
possible to work with DALI groups.
Select the
Groups
tab and press
Scan groups.
After
having scanned the network for groups, the
Groups
tab
shows all the DALI groups and the found devices for every
group.
DALI groups are much more comprehensive than user-
defined groups. The important difference is that with DALI
grouping information is stored in the devices themselves.
Therefore, DALI grouping is more permanent than user-
defined grouping.
By clicking on a device you will make that particular device the active one, meaning
that all actions will be performed on this device only, and will be ignored by all other
devices.
The options are:
With a right-click on an un-grouped device you can:
o
Identify
the device
o
Add to,
add the device to one group
o
Configure…
, add device to multiple groups
With a right-click on a device in a group you can:
