17
Set clock
1
In standby mode, press and hold
RDS/
CLOCK
to activate the clock setting
mode.
The hour digits are displayed and begin
»
to blink.
2
Turn
/-
to set the hour.
3
Press
RDS/CLOCK
to confirm.
The minute digits are displayed and
»
begin to blink.
4
Turn
/-
to set the minute.
5
Press
RDS/CLOCK
to confirm.
Activate demonstration mode
You can see an overview of all features.
1
In standby mode, press on the main
unit to activate the demonstration mode.
A demonstration of major available
»
features starts.
To deactivate the demonstration mode:
1
Press on the main unit again.
Turn on/off decoration light
1
Press
DIM
to turn on/off the main set
decoration light.
Turn on
1
Press .
It takes 10 seconds to heat up before
»
the apparatus turns on.
4 Get
started
Caution
Use of controls or adjustments or
•
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install remote control
batteries
Caution
Risk of explosion! Keep batteries away from
•
heat, sunshine or fire. Never discard batteries
in fire.
Risk of decreased battery life! Never mix
•
different brands or types of batteries.
Risk of product damage! When the remote
•
control is not used for long periods, remove
the batteries.
1
Open the battery compartment.
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
b
c
a
English
EN
