English
21
Switching the system on/off
●
Press
ECO POWER/STANDBY-ON
B
.
➜
“
HELLO
” is displayed briefly. The system will
switch to the last selected source.
●
Press
DISC
,
TUNER
,
USB
or
AUX
on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press
ECO POWER/STANDBY-ON
B
.
Switching the system to Eco
Power Standby mode
●
Press
ECO POWER/STANDBY-ON
B
in
active mode.
➜
The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
mode with clock display.
●
The interactive sound settings, last selected
source and tuner presets will be retained in the
player’s memory.
●
If the system is in normal standby mode with
clock display, press and hold
ECO POWER/
STANDBY-ON
B
for 3 seconds or more to
switch to Eco power standby or vice versa.
Volume control
Turn
VOLUME (-/+)
clockwise or anticlockwise
(or press
VOL +/-
on the remote) to increase
or decrease the volume level.
➜
”
VOL XX
” is displayed on the display panel.
“
XX
” denotes the volume level.
To switch off the volume temporarily
●
Press
MUTE
on the remote.
➜
Playback will continue without sound and
“
MUTING
” flashes.
●
To activate sound reproduction, you can:
– press
MUTE
again;
– adjust the volume controls;
– change source.
To listen through the headphone
●
Connect the headphone plug to the
n
socket
on the front panel.
➜
The speakers will be muted.
Sound control
DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press
DBB
on the remote control to enable/
disable DBB feature.
➜
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press
DSC
on the remote control repeatedly to
select: FLAT, POP, JAZZ, CLASSIC or ROCK.
LOUDNESS
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
●
Press
LOUDNESS
on the remote to enable or
disable LOUDNESS feature.
➜
icon appears/disappears after this feature
is enabled/disabled.
Basic Operations
pg 001-022_MCD710_12_Eng
2007.11.29, 14:26
21
