Philips MCD396, User Manual, Page: 32 / 43

32
English
Radio Reception
Tuning to radio stations
1
Press SOURCE on the set or TUNER on the
remote repeatedly until the desired waveband
(FM) is displayed.
2
Press and hold TUNING
22
/
33
and release
the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING
22
/
33
briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.
1
Press PRESET
í
/
ë
to select the preset
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROG/ANGLE
on the remote for more
than three seconds to activate programming.
➜
All available stations are programmed.
Manual programming
1
Tune to your desired station (refer to “Tuning to
radio stations”).
2
Press PROG/ANGLE to activate
programming.
➜
PROG flashes on the display.
3
Press PRESET
í
/
ë
to allocate a number
from 1 to 40 to this station.
4
Press PROG/ANGLE again to confirm the
setting.
➜
PROG
disappears.
5
Repeat the four steps above to store other
stations.
●
You can overwrite a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press PRESET
í
/
ë
until the desired preset
station is displayed.
TAPE APE USB/A USB/AUX UX
pg001-pg041_MCD396-Eng 5/13/09, 15:21 32