English
31
Radio Reception
Tuning to radio stations
1
Press
SOURCE
on the set repeatedly or
TUNER
on the remote to select FM tuner
source.
2
Press and hold
TUNING
22
/
33
and release
the button.
➜
The radio automatically tunes to a station
with sufficient reception.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNING
22
/
33
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Press
ANGLE/PROG
on the system for more
than three seconds to activate programming.
➜
All available stations are programmed.
➜
AUTO
is displayed and available stations are
programmed in order of waveband.
Manual programming
1
Tune to your desired station (refer to “Tuning to
radio stations”).
2
Press
ANGLE/PROG
on the system to
activate programming.
➜
PROG
flashes on the display.
3
Press
PRESET
í
/
ë
to allocate a number
from 1 to 20 to this station.
4
Press
ANGLE/PROG
again to confirm the
setting.
➜
PROG
disappears.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press
PRESET
í
/
ë
until the desired preset
station is displayed.
RDS
Radio Data System
is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
and the
station name are displayed.
Scrolling through different RDS
information
●
Press
DISPLAY/RDS
on the remote control
briefly and repeatedly to scroll through the
following information (if available):
– Station name
– RDS clock
– Programme type such as
NEWS
,
SPORT
,
POP M
...
– Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1
Tune to a RDS station from FM band (refer to
“Tuning to radio stations”).
2
Press
DISPLAY/RDS
on the remote control.
➜
"
RDS 00
:
OO
" appears..
➜
If the RDS station does not transmit RDS
time, "
RDS CLOCK
" appears.
Note:
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
pg025-pg037_MCD288E-12-Eng-B
2007.12.21, 17:22
31
Summary of Contents for MCD288E
Page 9: ...9 ...
