EN
23
English
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
•
stations.
1
Tune to a radio station.
2
Press
PROGRAM
to activate
programming.
»
PROG
begins to blink.
3
Press
PRESET
/ to allocate a number
from 1 to 20 to this radio station.
4
Press
PROGRAM
to confi rm.
»
PROG
disappears.
5
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another
•
station in its place.
Tune to a preset radio station
1
Press
PRESET
/ to select a preset
number that you want.
Tip
You can also use the numerical keypad to select a
•
preset station directly.
Set RDS clock
You can use time signal broadcast together
with the RDS signal to set the clock of the unit
automatically.
1
Tune to a RDS radio station that
transmits time signals.
7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna (see
‘Connect FM antenna’ on page 12 ).
2
Press
SOURCE
on the unit or
TUNER
on the remote control repeatedly to
select FM tuner source.
3
Press and hold
TUNING
/ on the
unit or ( / on the remote control).
4
When the frequency indication starts to
change, release the button.
The FM tuner tunes to a station with
»
strong reception automatically.
5
Repeat steps 3-4 to tune to more
stations.
To tune to a weak station:
Press
TUNING
/ repeatedly until you fi nd
optimal reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
•
stations.
1
Press and hold
PROGRAM
for more
than 3 seconds to activate automatic
programming.
»
[AUTO]
is displayed.
All available stations are programmed
»
in the order of waveband reception
strength.
