English
19
Tuner
Tuning to radio stations
1
Press
SOURCE
(or
DAB/FM
on the remote
control) once or more to select
FM
.
2
Press and hold
4
/
¢
on the set (or
à
/
á
on the remote control ) until
SEARCH
appears.
➜
The radio automatically tunes to a station
with sufficient reception. Display shows
SEARCH
during automatic tuning.
3
Repeat step
2
if necessary until you find the
desired station.
●
To tune to a weak station, press
à
/
á
on the
remote control briefly and repeatedly until you
have found optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
(FM and DAB) in the memory, manually or
automatically.
Automatic programming
Automatic programming will star t from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
1
Press
ALBUM/ /-
on the set once
or more to select the preset number where
programming should start.
Note:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
Press and hold
PROG
until
AUTO PROGRAM
appears.
➜
Available FM stations are programmed.
➜
After all stations are stored, the first preset
station will then be played.
Manual programming
1
Tune to your desired station (see
Tuning to
radio stations
).
2
Press
PROG
to activate programming.
➜
PROG
flashes.
3
Press
ALBUM/ /-
on the set to
allocate a number from 1 to 20 to this station.
4
Press
PROG
to confirm.
➜
Display shows the preset number, waveband
and the frequency of the preset station.
5
Repeat steps 1-4 to store other stations.
●
You can erase a preset station by
storing another frequency in its place.
To listen to a preset station
●
Press
ALBUM/ /-
on the set once
or more until the desired preset station is
displayed.
RDS
The feature RDS (
R
adio
D
ata
S
ystem) is a
service that allows FM stations to send
additional information along with the regular FM
radio signal. When you are receiving an RDS
station,
and the station name are
displayed.
Switching through RDS information
1
Tune to the desired RDS radio station on the
FM waveband (see
Tuning to radio stations
).
2
Press
INFO./RDS
on the remote control
repeatedly to switch through the following
information (if available):
– Station name
– Program type (for example: News, Sport, etc.)
– Radio text messages
– Frequency
Note:
–
NO PS
,
NO PTY
or
NO TEXT
is displayed if
you press INFO./RDS and no RDS signal is
available.
Automatic clock setting via RDS
When the set is on, the clock can be
automatically set by a time signal broadcast
together with the RDS signal. This only works if
the RDS station is sending this time signal.
Note:
– The time signal broadcast from certain RDS
stations may not always be accurate.
P001-P029_MCB279_05_Eng
2008.5.8, 16:23
19
Summary of Contents for MCB279
Page 3: ...3 3 4 5 2 1 6 8 7 9 0 ...
