Philips MC230E, User Manual

Page: 17 / 19

English
3140 115 xxxxx
17
Clock/Timer
Setting the clock
1
In standby mode or system on, press and hold
CLOCK SET
on the remote control for more
than 3 seconds.
➜
SET CLOCK
scrolls on the display.
➜
The clock digits for the hours flash.
2
Press VOLUME
+
/
-
to set the hours.
3
Press CLOCK SET again.
➜
The clock digits for the minutes flash.
4
Press VOLUME
+
/
-
to set the minutes.
5
Press CLOCK SET to confirm the time.
Viewing the clock
Press
CLOCK SET
➜
The clock time is displayed.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD, TUNER is switched on at a set
time. The clock time needs to be set first before
the timer can be used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode or system on, press and hold
TIMER on the remote control for more than 3
seconds.
➜
SET TIMER
and
SELECT SOURCE
scrolls
on the display.
2
Press SOURCE or VOLUME
+
/
-
to select
sound source.
➜
Display sequence shows
CD
,
TUNER
.
➜
flashes.
3
Press
TIMER
to confirm your desired mode.
4
Press VOLUME
+
/
-
to set the hours.
5
Press
TIMER
again.
➜
The clock digits for the minutes flash.
6
Press VOLUME
+
/
-
to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating
TIMER
●
Press TIMER on the remote to turn off the
timer or turn on to the last setting again.
➜
If activated, the timer information will display
for a few seconds, then the system resumes to
the last active source or stays in standby mode.
➜
If deactivated, “
OFF
” appears.
Note:
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
Press SLEEP on the remote control once or
more.
➜
Display shows
SLEEP
and
one of the sleep time options
in sequence:
90
,
75
,
60
,...,
45
,
30
,
15
,
OFF
,
90
. if you have
selected a time. Once SLEEP is
activated,
SLEEP
is display.
●
To deactivate, press SLEEP on the remote
control once or more until
OFF
is shown, or
press
STANDBY-ON
on the system or
remote control.