13
English
Preparations
For wired operation (Ethernet)
INTERNET
DSL or
cable modem
gateway
router
Data port
Power outlet
from
RJ45
After the Internet connection of a PC in the
home network has proven to be working,
connect the MC-i250 to the gateway router with
the supplied cable. Press
INTERNET
.
The Streamium MC-i250’s network settings are
by default set to
‘DHCP
’ (dynamic IP addressing)
and ‘
NO PROXY
’. When your router is
configured as a DHCP server and your ISP does
not use a proxy, the set should automatically
establish a connection to the Internet.
If your home network uses static IP addressing,
you will have to set a static IP address, network
mask, default gateway and two DNS servers.
This information can be obtained from your ISP.
Also, if your ISP uses a proxy server, you will have
to enter the proxy name and proxy port.
Information you might need for setup
(can be requested from your ISP):
●
Does the network use static or dynamic
(DHCP) IP addressing?
➜
In DHCP, an IP address is automatically
assigned to the set. In static IP mode, the
information mentioned above has to be entered
using the remote control.
●
Does the ISP use a proxy?
➜
If yes, what is the proxy name and proxy
port?
●
Does the ISP only allow registered devices to
use DHCP?
➜
If yes, you might have to tell the ISP the set’s
MAC address (can be found in ‘
SET OPTIONS
’
under ‘
NETWORK INFO
’).
As soon as you are asked to enter your email
address on the screen, your set has successfully
established a connection to the Internet.
To activate the online features of MC-i250, you
still have to complete the registration.
Registration
1
Enter your email address (using the remote
control) on the set and press
OK/PLAY
(
2
).
2
After a shor t moment you will receive an e-mail
at the entered address. Create your account with
“http://My.Philips.com” and activate music
services by following the instructions received in
that e-mail.
–
Use the numerical/alphabetical keypad on the
remote control to enter your e-mail address.
–
To delete a character, press
S
to move the
cursor backward.
–
To exit the registration mode without storing,
press
Ç
.
–
Press
OK
(
2
) to confirm your entry. Your
registration confirmation details will be e-mailed
to you.
– Registration is only available for the default
user.
