manualshive.com logo in svg

Philips MC-90, Manual, Page: 23 / 39

Share
Download
Philips MC-90 Manual Download Page 23

23

English

3139 115 20961

5

Press 

YES 

to store the selection.

●

Press 

NO 

will clear the current track selection

and back to the previous track in the program.

6

Repeat 

steps 3–5

 to store other discs and

tracks.

7

To end programming, press 

Ç

 

once

 .

➜

PROG

 stays and the program mode remains

active.

➜

The total number of tracks programmed and

the total playing time are displayed.

8

To start program play, press

ÉÅ

 .

➜

"

PLAY PROGRAM

" is displayed.

Notes:
– If the total programmed playing time is more
than 320 minutes, "

--

:

--

" is displayed.

– If you attempt to program more than 99 tracks,
"

PROGRAM FULL

" is displayed.

– In program mode, pressing the CD DIRECT
1/2/3 buttons on the remote control will play the
selected disc and the stored program will be
ignored temporarily.  The program will resume
when playback of the selected disc ends.
– During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.

To review the program

●

Stop playback and adjust 

JOG CONTROL

 (or

press

í

 or 

ë

 on the remote control).

●

To exit review mode, press 

Ç

.

Changing the program

1

Press 

PROG

.

2

Press 

à

 or 

á

 to move to the track number

you want to change.

3

To remove the track from the program;

Refer to ”Erasing the program”.

To insert a new track;

Adjust 

JOG CONTROL

 to select a new track

and press 

YES

 to confirm.

➜

The new track will be inserted in front of the

selected track.

Erasing the program

To erase a track

1

Stop playback and press 

CD 1•2•3

 or 

CDR

 to

select a disc.

2

Press 

PROG

.

3

Press 

à

 or 

á

  to select a track number.

4

Press 

NO 

to erase the selected track from the

program.

➜

"

CLEARED

" is displayed.

➜

The following program tracks’ numbers are

decreased by one.

To erase the entire program

1

Stop playback and press 

NO

.

➜

"

CLEAR PROG

?

" is displayed.

2

Press 

YES 

to erase the entire program.

➜

PROG

 disappears and "

PROG CLEARED

" is

displayed.

Note:
– The program will be erased when the system
switched to standby mode, disconnected from the
power supply or when the disc tray is opened.

CD Changer/Recorder Operations

pg 001-039/MC90/37-Eng

1/30/02, 8:59 AM

23

Summary of Contents for MC-90








































Reviews:

No comments