20
English
3103 306 18522
2
To resume normal playback, press
REPEAT
until "
OFF
" is displayed.
➜
REPEAT
is shown, except for REPEAT OFF
mode.
Random play
1
Press
SHUFFLE
on the remote control.
➜
SHUFFLE
is shown and "
SHUFFLE
" is
displayed.
➜
All the available discs or programmed tracks
(if programme is active) will be played in random
order.
2
To resume normal playback, press
SHUFFLE
again.
➜
SHUFFLE
disappears.
Notes:
– Selecting SHUFFLE during repeat playback will
cancel all repeat modes.
– Pressing the CD OPEN•CLOSE button will cancel
all repeat and shuffling modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc trays (refer to
“Loading Disc”).
2
Press
PROG
to start programming.
➜
PROGRAM
starts flashing.
3
Press
CD 1•2•3
or
CD DIRECT 1/2/3
button
to select a disc.
4
Press
í
or
ë
repeatedly to select the desired
track.
5
Press
PROG
to store the track.
●
Repeat
steps 3–5
to store other discs and tracks.
6
To end programming, press
Ç
once
.
➜
PROGRAM
stays and the program mode
remains active.
➜
The total number of tracks programmed and
the total playing time are displayed.
7
Press
PLAY
É
(
ÉÅ
)
to start program
playback.
➜
"
PLAY PROGRAM
" is displayed.
CD Operation
Notes:
– If the total playing time is more than "
99
:
59
"
or if one of the programmed tracks has a number
greater than 30, then "
--
:
--
" is displayed
instead of the total playing time.
– If you attempt to program more than 40 tracks,
"
PROGRAM FULL
" is displayed.
– If you press any of the CD DIRECT 1/2/3
buttons on the remote control, the system will play
the selected disc or track, and the stored program
will be ignored temporarily. The
PROGRAM
symbol
also will disappear temporarily from the display. It
will reappear when playback of the selected disc
ends.
– During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
To review the program
●
Stop playback and press
í
or
ë
repeatedly.
●
To exit review mode, press
Ç
.
Erasing the program
●
Press
Ç
once
when playback is stopped or
twice
during playback.
➜
PROGRAM
disappears and "
PROGRAM
CLEARED
" is displayed.
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to “Tape
Operation/Recording”.
pg 001-032/MC77/37-Eng
4/16/02, 7:19 PM
20
