23
English
General Information on
Recording
●
For recording, use only tape of IEC type I
(normal tape).
●
The recording level is set automatically, regardless
of the position of the Volume, Incredible
Surround, BASS/TREBLE, and so forth.
●
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
●
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
●
If “
CHECK TAPE
” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
Preparation for Recording
1
Press
TAPE
to select tape mode.
2
Load a recordable tape into the tape deck.
3
Press
í
or
ë
to select the recording tape side.
➜
A
appears on the display for the reverse
side.
➜
B
appears on the display for the forward
side.
4
Press
AUTO REV.
on the remote control
repeatedly to select a recording mode.
➜
å
for recording on one side only.
➜
∂
∂
∂
∂
∂
for recording on both sides.
5
Prepare the source to be recorded.
CD 1•2•3
– load the disc(s).
TUNER
– tune to the desired radio station.
AUX
– connect external equipment.
When recording is in progress
➜
starts flashing.
●
It is not possible to change tape side.
●
It is not possible to listen to another source.
●
It is not possible to activate the timer function.
One Touch Recording
1
Press
CD 1•2•3
,
TUNER
or
AUX
to select the
source.
2
Start playback of the selected source.
3
Press
0
REC
to start recording.
To stop recording
●
Press
Ç
on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE
" will be displayed.
Tape Operation / Recording