Philips MBD3000/12, Service Manual

Page: 16 / 51

Direction of Use
7-4
Analog stereo system
FM antenna
USB flash drive
Wired/Wireless network
Note
Refer to the type plate at the back or bottom
of the product for identification and supply
ratings.
Before you make or change any connections,
ensure that all the devices are disconnected
from the power outlet.
Connect speakers
Note
Insert the stripped portion of each speaker
wire into the socket completely.
For optimal sound, use the supplied speakers
only.
Connect only speakers with impedance that is
the same or higher than the supplied speakers.
For the main unit side:
1
Match the type and colors of the speaker
cable connectors to the speaker input
sockets on the back of the main unit.
2
Connect the speaker cables.
COAXIAL Pr/Cr
Pb/Cb
COMPONENT W i - F i
Y OPTICAL
DIGITAL AUDIO OUT
O E D I V
T U O
DIGITAL AV OUT
L AN
AC ~
AUX
IN
LINE
OUT
L R
L R
ANTENNA
FM
S P E A K E R O U T
R L
3 Connect
Make the following connections to use this
product.
Preparations
1
Place the apparatus near to the TV.
2
Place the front left and right speakers
at equal distance from the TV and at an
angle of approximately 45 degrees from
the listening position.
Note
To avoid magnetic interference or unwanted
noise, never place this apparatus and
speakers too close to any radiation devices.
Basic connections:
Speakers
Video
Audio
Power
Optional connections:
Route audio to other devices
HDMI-compliant AV receiver/amplifier
Multi-channel AV amplifier/receiver
Digital AV amplifier/receiver