Philips Matchline 28PW9509, User Manual, Page: 20 / 36

16
Press the
v
key on the remote control repeatedly to select
EXT1
,
EXT2, EXT3
or
SIDE
according
to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
To select connected equipment
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Cinema Link surround receiver
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder or DVD menu on screen.
&
Press the
MENU
key on the remote control.
é Select the
Recorder
or
DVD
menu with the
cursor up/down.
“ Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key
®
for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the
B
key for 3 seconds,
both TV and the recorder are switched to standby.
Ò p ‡ π † ®
Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Ò p ‡ π †
Ï
Prev. Play Stop Play Next Eject
DVD
&
Connect the audio cables to the
AUDIO
input
of your amplifier and to
AUDIO L
and
R
at the
back of your TV.
é
The output level is controlled by the volume
control of the amplifier.
Note: Switch off the TV and your audio amplifier
before connecting them. Set the audio amplifier’s
volume to minimum.
AUDIO
Stereo amplifier and two extra front speakers
2288.1 en 21-01-2004 08:37 Pagina 16