Additional TV channel settings
You can change the name of a TV channel. If the reception
of a TV channel is poor, you can change the “TV system”,
switch off Stereo/2-channel sound and change the tuning of
the TV channel slightly.
1
Press DVD/MON as often as necessary to see the
TV channel currently selected on the DVD recorder
system.
2
Press CH + or CH – or 0–9 repeatedly to select a
TV channel on the DVD recorder system.
3
Press SYSTEM MENU.
4
Press
1
as often as necessary to select
A
.
5
Press
4
or
3
as often as necessary to select
y
Installation
. Next, press
2
to confirm.
6
Press
4
as often as necessary to select
Manual search
.
Next, press
2
to confirm.
7
Press
4
repeatedly to select either
➜
TV channel name
: to set the TV channel name,
➜
Decoder
: to decode an encoded TV channel. See “Using
a decoder to decode a TV channel”,
➜
TV system
: to change the TV system of the TV channel,
➜
NICAM
: to switch NICAM on/off,
➜
Fine tuning
: to change the tuning of the TV channel
slightly.
TV channel name
1
Press
2
repeatedly to select a character of the TV channel
name.
2
Press
3
or
4
repeatedly to set/change the desired
character.
3
Repeat steps
1
and
2
for all characters of the channel
name.
Note: Channel names are limited to 5 characters.
4
Press OK to store the TV channel name.
5
Press SYSTEM MENU to end.
TV system
If the TV system of the TV channel and that of your TV
are not the same, the sound and/or the picture may be
distorted or missing. Usually the TV system is detected
automatically.
1
Press
2
repeatedly to select the TV system (
PAL-BG
,
PAL-I
,
PAL-DK
,
SECAM
,
SEC-BG
,
SEC-DK
) which
produces the clearest sound and picture on your TV.
Note: If you change TV system to a setting not supported by
your TV set, the picture and/or sound may be missing.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
NICAM
1
Press
2
repeatedly to switch NICAM on or off:
➜
On
: Stereo and 2-channel sound is supported.
➜
Off
:To improve the sound quality of a weak TV channel,
only mono sound is supported.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
Fine tuning
1
If the reception of the TV channel is distorted, press
3
or
4
repeatedly to change the tuning of the TV channel
slightly.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
System settings
52
English
Channel/freq.
CH
Entry/search
48
Programme number
07
TV channel name
PHI
Decoder
On
TV system
PAL-BG
NICAM
On
Fine tuning
0
To exit press
SYSTEM MENU
Installation
Manual search
