Philips Lumea BRI860, Manual

Page: 29 / 244

Note: Your skin may react differently on different
days/occasions for a number of reasons.
Handling the device
1
Before use, clean the light exit window.
2 Put the adapter in the wall socket.
3 Switch on the device and select the right light
intensity for your skin tone. See chapter:
'Selecting the right light intensity'.
90º
4
Place the device at a 90° angle on the skin so
that the integrated safety system is in contact
with your skin.
The integrated safety system prevents
unintentional flashing without skin contact.
5 Press the device firmly onto your skin to ensure
proper skin contact. The 'ready to flash' light
lights up green to indicate that you can proceed
with the treatment.
Note: When the ‘ready to flash’ light starts
blinking orange, your skin is not suitable for
treatment. In this case, the device automatically
disables. You can try to use the device on other
areas with a lighter skin tone.
Note: If the ' ready to flash' light does not lights
up green, the device is not completely in
contact with your skin.
TIP: If you use Lumea on your bikini area and
want to leave some hair in place, make sure
that the skin tone sensor is not placed on the
29
English