1.9
n
Press the
key to increase the dwell time. Dwell times
may be programmed from SKIP to 9 seconds. (When you
reach 9 seconds, pressing the
key will toggle you
through the sequence again. A setting of "SKIP" removes
the channel from the sequence.
n
Select
EXIT
and press the
key to exit the menu.
5.5
Alarm Setup
The
ALARM SETUP
menu allows you to set the alarm options
for each of the video inputs. The alarms can be set on or off,
dwell time, polarity and video loss. The unit can also have the
audio beeper set to on or off.
n
Select
ALARM SETUP
and press the
key. The
following menu is displayed:
5.5.1
Setup an Alarm Channel
You can switch the alarm function ON/OFF for each of the
four video input channels.
n
Select
ALARM ON/OFF
and press the
key. The
following menu is displayed:
n
Press the
and
keys to move the cursor to required
channel.
n
Press the
key to toggle the channel
ON
or
OFF
.
n
Select
EXIT
and press the
key to exit the menu.
5.5.2
Alarm Dwell Time
The
ALARM DWELL
function allows you to set the automatic
reset period after an alarm is generated.
n
Select
ALARM DWELL
and press the
key. The
following menu is displayed:
n
Press the
and
keys to adjust the time. Options are:
1-60 SEC
: automatic reset period.
HOLD
: alarm continues until the alarm camera key is
pressed followed by the
key.
FOLLOW
: alarm continues until the alarm camera key is
pressed followed by the
key.
n
Press the
key to exit the menu.
5.5.3
Alarm Polarity
The
ALARM POLARITY
function enables you to define how
the alarm is generated for each alarm input, either normally
open (NO) or normally closed (NC) contacts.
n
Select
ALARM POLARITY
and press the
key. The
following menu is displayed:
n
Press the
and
keys to move the cursor to required
channel.
n
Press the
key to toggle the channel
NO
or
NC
.
n
Select
EXIT
and press the
key to exit the menu.
Note:
Alarm functions are disabled when in the menu or VCR mode.
>
>
ALM ( )
ALM ( )
>
>
>
>
ALARM SETUP
(1) ALARM ON/OFF
(2) ALARM DWELL
(3) ALARM POLARITY
(4) VIDEO LOSS ALERT
(5) BEEPER ON
(6) EXIT
ALARM ON/OFF
(1) CHANNEL 1: ON
(2) CHANNEL 2: ON
(3) CHANNEL 3: OFF
(4) CHANNEL 4: ON
(5) EXIT
AUTO RESET TIME
60 SEC
ALARM POLARITY
(1) CHANNEL 1: NO
(2) CHANNEL 2: NO
(3) CHANNEL 3: NO
(4) CHANNEL 4: NO
(5) EXIT
