background image

Warnings

Warning: To prevent fire or shock hazard, do not expose camera or monitor to rain or

moisture.

The lightning flash with arrowhead symbol, within a triangle, is intended
to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure; that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service
personnel.

The exclamation mark within a triangle is intended to alert the user to
the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

Important safety instructions

Read Instructions: All safety and operating instructions should be read before the product is

operated.

Retain Instructions: The safety and operating instructions should be retained for future reference.
Head Warnings: All warnings on the product and in the operating instructions should be

adhered to.

Follow Instructions: All operating and user instructions should be followed.
Cleaning: Unplug this product from the outlet before cleaning.
Water & Moisture: Do not use this product near water - e.g. a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool.

Power Sources: This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supply to your home, con-
sult your product dealer or local power company.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be

walked on or pinched by items placed on or against them. Pay particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the product.

Lightning: For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet.

Object & Liquid Entry: Never push objects of any kind into this product through openings as

they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.

Summary of Contents for LTC0350/51









Reviews: