background image

1.3

E

SAFETY PRECAUTIONS

This label may appear on the bottom of the unit due to space
limitations.

The lightning flash with an arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of un-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons. 

The exclamation point within an equilateral
triangle is intended to alert the user to presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

Attention:

Installation should be performed by

qualified service personnel only in accordance
with the National Electrical Code or applicable
local codes.

Power disconnect: 

Units with or without

ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source. The power cord is the main power
disconnect for all units.

Notice:

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. however, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:

n

Reorient or relocate the receiving antenna

n

Increase the separation between the equipment and receiver.

n

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

n

Consult the dealer or an experienced radio/TV technician for
help.

COVER REMOVAL

CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT OPEN
COVERS. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.

WARNING:
REMOVAL OF THE COVER
SHOULD ONLY BE PERFORMED
BY QUALIFIED SERVICE
PERSONNEL - NOT USER
SERVICEABLE. THE UNIT
SHOULD ALWAYS BE
UNPLUGGED, BEFORE
REMOVING THE COVER AND
REMAIN UNPLUGGED WHILE
THE COVER IS REMOVED.

Summary of Contents for LTC 2009











Reviews: