1.6
g
(5)
V-HOLD
- When the picture is rolling up or down,
adjust this control until a stable single picture is
obtained.
(6)
VIDEO IN/OUT connectors
- For receiving the output
from a camera, a VCR or another monitor and for
connecting the video output of the monitor to the Video
input of another monitor or a VCR. If only video input
is connected to any BNC connector, the input
impedance is 75 . When both video input and
extension monitor are connected, the input impedance
of this monitor is automatically converted to HI-Z state
then terminated with 75
Ω
at extension monitor.
(7)
DC RESTORATION switch
- DC restored operation
(“ON” position) provides all shades of grey level from
black to white faithfully on the monitor and is
recommended in high light level CCTV application.
DC restoration “OFF” is recommended in low light level
CCTV application.
(8)
SCAN (Over/Under Scan) switch
- Set to OVER to see
normal CCTV application. Set to UNDER to see entire
picture.
(9)
V-LIN (Vertical Linearity)
- Adjust this control for the
vertical linearity of the picture.
(10)
V-HEIGHT (Vertical Height)
- Adjust this control for
the vertical size of the picture.
(11)
H-WIDTH (Horizontal Width)
- Adjust this control
for the horizontal size of the picture in Over/Under scan.
4
TECHNICAL DATA
Feature
LTC 2009/50
LTC 2012/50
LTC 2017/50
LTC 2009/60
LTC 2012/60
LTC 2017/60
Mains supply
LTC 20xx/50; 220-240 Va.c.
LTC 20xx/60; 100-120 Va.c.
Power consumption
27W
32W
27W
Picture tube
9” diagonal
12” diagonal
17” diagonal
90° deflection
90° deflection
90° deflection
Resolution
600 lines
600 lines
700 lines
Video input/output
0.5 to 2.0 Vpp composite, sync. negative
Input impedance
High (10 k )/75
Ω
switchable
Operating temperature
+10° to + 50°C
+10° to + 50°C
+0° to + 40°C
Dimensions (HxWxD)
240x220x246 mm
290x305x307 mm
415x385x390 mm
Weight
5.9 kg
8.9 kg
15 kg
Summary of Contents for LTC 2009
Page 6: ...1 2 g ...
