5. FUNCTIONAL OVERVIEW
CONTROLS
On projector (fig. 1)
1
Power ON
z
For switching the projector in power on.
Standby/OFF
y
For switching the projector in standby mode.
2
Lens
For selecting the optical lens adjustments Zoom, Focus,
Digital Keystone correction and Digital Image Shift (see
Note). The button toggles between the ZOOM-, FOCUS-,
KEYSTONE and DIGITAL SHIFT function.
Note:
Digital Image Shift feature can only be addressed while
being in the WIDE and NORMAL (WIDE) picture display
modes during video or DTV input.
(See page 24 for details.)
3
Data-1 button
For selecting the Data 1 signal as the current projection source.
4
Data-2 button
For selecting the Data2 signal as the current projection source.
5
Video button
For selecting the video signal or S-video signal as the current
projection source.
6
Auto sync
For activating the Auto sync operation in Data mode.
7
OK
For action confirmation in the menu when the menu is on
the screen (activated)
8
Cursor Control
When the menu is active the Cursor Control buttons control the
menu cursor. The cursor control, by means of the local
keyboard, works with up/down and left/right button operation.
9
D-Zoom
For addressing the D-Zoom function. The button toggles
between the digital magnification factors, x1, x2, x3, x4, x6
and x8.
0
D-Freeze button
Digital Freeze function: to instantly freeze a moving image.
!
V-Effect button
Digital Video Effect correction: to enhance image quality.
@
V-Format button
Allows to modify or customise the picture display mode.
#
Menu
For activating and de-activating the On Screen Display
Menu
$
Volume buttons (+/-)
To adjust audio volume level.
%
Temperature warning indicator (Temp.)
Flashes when the temperature of the projector is too high
^
Lamp replacement indicator (Lamp)
Lights to indicate the status of the lamp;
Green:
lamp is ready
Flashing green:
warming up
Red:
change the lamp
&
Audio / Video - Mute
For muting the sound of the projector (or an externally
connected sound amplifier) and for muting the picture.
*
Power indicator
y
I
Lights up red when the projector enters standby mode.
Lights up green when the projector is turned on.
(
Cooling fan
Intake of air for ventilation.
)
Kensington Security Standard connector
Slit for inserting an optional locking device (Kensington lock).
¡
Carrying handle
™
Foot releases/height adjustment
For adjusting the height and vertical angle of the projector.
£
Remote control sensors
Receive the signals from the remote control.
≤
Speakers
∞
Cooling fan
Exhaust of air for ventilation.
§
Air filter/Cooling fan
7
See illustrations on page 4
