Alignments
8.
•
OP37: EW_FUNCTION
0: EW function is disabled. In this
case, only Expand 4:3 is allowed, Compress 16:9 is not
applicable. 1: EW function is enabled. In this case, both
Expand 4:3 and Compress 16:9 are applicable. Default
setting: 0.
•
OP40: STEREO_NON_DBX
0: For AP_NTSC, chip TDA
9853 is not present, 1: For AP_NTSC, chip TDA 9853 is
present, Default setting: 0.
•
OP41: STEREO_DBX
0: For AP_NTSC, chip MSP 3445 is
not present, 1: For AP_NTSC, chip MSP 3445 is present,
Default setting: 0.
•
OP42: STEREO_PB
0: For AP_PAL, chip MSP3465 is not
present, 1: For AP_PAL, chip MSP3465 is present, Default
setting: 0.
•
OP43: STEREO_NICAM_2CS
0: For EU and AP_PAL,
chip MSP 3415 is not present, 1: For EU and AP_PAL, chip
MSP 3415 is present, Default setting: 0.
•
OP44: DELTA_VOLUME
0: Delta Volume Level is disabled
or not applicable, 1: Delta Volume Level is enabled, Default
setting: 0.
•
OP45: ULTRA_BASS
0: Ultra Bass is disabled or not
applicable, 1: Ultra Bass is enabled, Default setting: 0.
•
OP46: VOLUME_LIMITER
0: Volume Limiter Level is
disabled or not applicable, 1: Volume Limiter Level is
enabled, Default setting: 0.
•
OP47: INCR_SUR
0: Incredible Surround feature is
disabled, 1: Incredible Surround feature is enabled, Default
setting: 1
•
OP50: PIP
0: PIP is disabled or not applicable, 1: PIP is
enabled, Default setting: 0.
•
OP51: HOTEL_MODE
0: Hotel mode is disabled or not
applicable, 1: Hotel mode is enabled, Default setting: 0.
•
OP52: SVHS
0: SVHS source is not available, 1: SVHS
source is available, Default setting: 0.
Note:
This option bit is not applicable for EU.
•
OP53: CVI
0: CVI source is not available, 1: CVI source is
available, Default setting: 0.
•
OP54: AV3
0: Side/Front AV3 source is not present, 1:
Side/Front AV3 source is present, Default setting: 0.
•
OP55: AV2
0: AV2 source is not present, 1: AV2 source is
present, Default setting: 0.
Note:
For EU, when AV2=1, both EXT2 and SVHS2 should
be included in the OSD loop.
•
OP56: AV1
0: AV1 source is not present, 1: AV1 source is
present, Default setting: 0.
•
OP57: NTSC_PLAYBACK
0: NTSC playback feature is not
available, 1: NTSC playback feature is available, Default
setting: 0.
•
OP60: Reserved Default setting: 0.
•
OP61: SMART_TEXT
0: Smart Text Mode and Favourite
Page are disabled or not applicable, 1: Smart Text Mode
and Favourite Page are enabled, Default setting: 1.
•
OP62: SMART_LOCK
0: Child Lock and Lock Channel are
disabled or not applicable for EU, 1: Child Lock and Lock
Channel are enabled for EU, Default setting: 1.
•
OP63: VCHIP
0: VCHIP feature is disabled, 1: VCHIP
feature is enabled, Default setting: 1.
•
OP64: WAKEUP_CLOCK
0: Wake up clock feature is
disabled or not applicable, 1: Wake up clock feature is
enabled, Default setting: 1.
•
OP65: SMART_CLOCK
0: Smart Clock Using Teletext and
Smart Clock Using PBS is disabled or not applicable, 1:
Smart Clock Using Teletext and Smart Clock Using PBS is
enabled. For NAFTA, menu item AUTOCHRON is present
in the INSTALL submenu, Default setting: 0.
•
OP66: SMART_SURF
0: Smart Surf feature is disabled or
not applicable, 1: Smart Surf feature is enabled, Default
setting: 0.
•
OP67: PERSONAL_ZAPPING
0: Personal Zapping
feature is disabled or not applicable, 1: Personal Zapping
feature is enabled, Default setting: 0.
•
OP70: MULTI_STANDARD_EUR
0: Not for Europe multi
standard set, or this option bit is not applicable, 1: For
Europe multi standard set. Default setting: 0.
Note:
This option bit is used to control the SYSTEM
selection in Manual Store: If MULTI_STANDARD_EUR =
1 then SYSTEM = Europe, West Europe, East Europe, UK,
France otherwise SYSTEM = ‘Europe, West Europe, UK
for West Europe’ (WEST_EU=1) or SYSTEM = ‘Europe,
West Europe, East Europe for East Europe’
(WEST_EU=0)
•
OP71: WEST_EU
0: For East Europe set, or this option bit
is not applicable, 1: For West Europe set, Default setting: 0.
•
OP71 and 70: SYSTEM_LT_1, SYSTEM_LT_2
These two
option bits are allocated for LATAM system selection. 00:
NTSC-M 01: NTSC-M, PAL-M 10: NTSC-M, PAL-M, PAL-
N 11: NTSC-M, PAL-M, PAL-N, PAL-BG Default setting: 00
•
OP70, 71 and 72: SOUND_SYSTEM_AP_1,
SOUND_SYSTEM_AP_2,
SOUND_SYSTEM_AP_3
These three option bits are
allocated for AP_PAL sound system selection. 000: BG
001: BG / DK 010: I / DK 011: BG / I / DK 100: BG / I / DK
/ M Default setting: 00
•
OP73: COLOR_SYSTEM_AP
This option bit is allocated
for AP-PAL colour system selection. 0: Auto, PAL 4.43,
NTSC 4.43, NTSC 3.58 1: Auto, PAL 4.43, NTSC 4.43,
NTSC 3.58, SECAM Default setting: 0
•
OP74: Reserved Default setting: 0.
•
OP75: Reserved Default setting: 0.
•
OP77 and 76: TIME_WIN1, TIME_WIN2
00: The time
window is set to 1.2s 01: The time window is set to 2s 10:
The time window is set to 5s 11: not in use Default setting:
01
Note:
The time-out for all digit entries depend on this
setting.
8.3.2
Tuner
Note:
Described alignments are only necessary when the NVM
(item 7602) is replaced.
Figure 8-7
IF PLL
This adjustment is auto-aligned. Therefore, no action is
required.
AFW (AFC window)
Fixed value is OFF.
AGC (AGC take over point)
Set the external pattern generator to a colour bar video signal
and connect the RF output to aerial input. Set amplitude to 10
mV and set frequency to 475.25 MHz (PAL/SECAM) or 61.25
MHz (NTSC).
Connect a DC multimeter to pin 1 of the tuner (item 1000 on
the main panel).
1.
Activate the SAM.
2.
Go to the TUNER sub menu.
3.
Select AFW with the UP/DOWN cursor keys and set to ON.
S A M
I
F
P L L
X X X
A F W
A G C
X X X
Y D
X X X
C L
X X X
A F A
O N / O F F
A F B
O N / O F F
CL 16532008_0
50
220501
X X X
