Alignments
8.
4.
Press the AUTO PICTURE button on the remote control
transmitter repeatedly to choose PERSONAL or MOVIES
picture mode.
5.
To enter SDAM, press the following key sequence on the
remote control transmitter: 0 6 2 5 9 6 directly followed by
the MENU button (do not allow the display to time out
between entries while keying the sequence).
6.
Use the MENU UP/DOWN keys to highlight the
GEOMETRY sub menu.
7.
Press the MENU LEFT/RIGHT keys to enter the
GEOMETRY sub menu.
8.
Use the MENU UP/DOWN keys to highlight either the
HORIZONTAL sub menu or the VERTICAL sub menu.
9.
Press the MENU LEFT/RIGHT keys to enter either the
HORIZONTAL sub menu or the VERTICAL sub menu.
10. Use the MENU UP/DOWN keys to select items in the
HORIZONTAL sub menu or the VERTICAL sub menu.
11. Use the MENU LEFT/RIGHT keys to adjust the values of
items in the HORIZONTAL and VERTICAL sub menus.
12. When all desired changes to the HORIZONTAL and
VERTICAL sub menu values are made, press the MENU
button twice to return to the top level SDAM menu.
13. To ensure the GEOMETRY settings are saved:
–
Turn the television set 'off' by using the 'POWER'
button on the remote control transmitter or the local
keyboard.
–
Disconnect the television set from AC power for at
least ten seconds.
–
Reconnect the television set to AC power.
–
Turn the television set 'on' by using the 'POWER'
button on the remote control transmitter or the local
keyboard.
Figure 8-5 Geometry alignments
The following alignments can be performed in the GEOMETRY
sub menu:
Horizontal Amplitude and Phase:
Figure 8-6 Horizontal alignment menu
•
Horizontal Shift (HSH). Select Horizontal Shift to center
the picture on the screen.
•
Horizontal Parallelogram (HP). Set Horizontal
Parallelogram to prevent the picture from slanting to one
side.
•
Horizontal Bow (HB). Set Horizontal Bow to prevent the
top and bottom of picture from bending to the sides.
CL 16532044_022.eps
140501
1
2
3
4
5
6
7
8
9
10
11
12
VERT. SLOPE
VERT. SHIFT
VERT. AMPLITUDE
V.S-CORRECTION
HOR. SHIFT
HOR. AMPLITUDE
E/W PARABOLE
UPPER E/W CORNER
LOWER E/W CORNER
E/W TRAPEZIUM
HOR. PARALLELOGRAM
HOR. BOW
HP
XX
HB
XX
HSH
XX
EWW
XX
EWP
XX
OCP
XX
LCP
XX
EWT
XX
S
HOR IZONTAL
>
VERTICAL
>
CL 26532046_006.eps
040402
www.freeservicemanuals.info
22/11/2016
Published in Heiloo Holland
