Philips IS 5022 Mark II, Instruction Manual

Page: 24 / 42

The
following is a general description of
how
an effect is
activated and
adjusted. (Specific descriptions for each effect
are
given in the following
sections of this chapter.)
1. Press the
SELECT
button until the LED of the required effect flashes.
The current setting for the effect is indicated on the
LED
bar.
2. Obtain the required setting by listening carefully and pressing the +
and -
ADJUST
buttons.
The
LED
bar will
show
the
setting.
The
act of
making an adjustment means the effect
will
be activated. If the
ADJUST buttons are n o t touched, the LED stops flashing after six sec ‑
onds
and the effect is
n o t
activated.
3. To hear
the
influence of
the effect, use the
EFFECT
ON/OFF button
to
toggle it
on/off
while the LED is flashing.
(If
the
EFFECT
ON/OFF button
is toggled while no LED is flashing, all the activated effects will be
toggled on/off.)
4. When the effect is satisfactory, do n o t touch the ADJUST buttons for
six seconds and the effect is activated. This is indicated by the LED
stopping flashing and remaining on. The
LED bar reverts to displaying
the
audio level.
2.1
COMBINATIONS OF
EFFECTS
The Sound Enhancer is able to perform either:
m
scratch
and/or
noise filter
and/or
stereo enhancement; or
m™ compress/expand.
Bass, treble, spatial and
fade
(time)
can be used with any of
these effects
(refer to
figure
5.1).
2.2
ACTIVATING
THE
EFFECTS
This section describes how to activate the different effects.
@ SCRATCH @ BASS @ SCRATCH @ BASS
@ NOISE FILTER @ TREBLE
fop|
@ NOISE FILTER @ TREBLE
@ STEREO ENHANCEMENT @ SPATIAL @ STEREO ENHANCEMENT © SPATIAL
Figure
5.1: Valid combinations of effects
2.2.1 Scratch, noise filter, stereo enhancement
Note:
These functions
cannot
be used while compress/expand is active.
To
activate either scratch, noise
filter or
stereo
enhancement.
1. Repeatedly press either of
the
SELECT
buttons until the
LED
of the
required effect
(scratch/noise
filter/stereo
e n h a n c e m e n t )
flashes.
(If
the
compress/expand effect was active, it will be automatically
de-activated.)