background image

27

ENGLISH

27

CLEANING AND MAINTENANCE

Daily cleaning of the machine.

 Caution:

Timely cleaning and maintenance of your machine is very important 
as it prolongs the life of your machine. Your machine gets exposed to 
moist, coff ee and limescale continuously!
In this chapter it is described in detail which activities you need to 
perform at which frequency. Not doing this will ultimately make 
your machine stop working properly. This repair is NOT covered by 
your warranty!

 

Note: 

Use a soft, dampened cloth to clean the machine.

Do not wash any of its parts in the dishwasher.

-   Do not immerse the machine in water.

Do not use alcohol, solvents, and/or abrasive objects to clean the 
machine.

Do not dry the machine and/or its components using a microwave 
and/or standard oven.

1

 Empty and clean the coff ee grounds drawer daily with the machine 

turned on.

Other maintenance operations can only be carried out when the machine 
is turned off  and unplugged.

2

 Empty and clean the coff ee residues drawer located inside of the ma-

chine. Open the service door, remove the coff ee residues drawer and 
empty the coff ee residues.

Summary of Contents for INTELIA EVO HD8752





























































Reviews: