HP3643
2-3
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
How to exchange a lamp and/or switch
- Undo and remove the 8 screws at the back of the lamp
housing.
- The lamp holders and the switch are now accessible.
Exchanging the lamp:
- Unscrew the lamp holder at one end and let the lamp slide
out of the housing between the reflector and the glass pane.
- Put the reflector with the glass pane in vertical position, i.e.
with its narrow end pointing downwards, and slip the lamp
through the opening next to the lamp holder. Make sure
the contact point of the lamp rests properly on the contact
point of the lower lamp holder.
- Tighten the lamp holder and make sure the contact points
are seated properly.
REPAIR INSTRUCTION
To replace the filter:
1. Open the device.
Be aware you keep the wiring in place.
2. Unscrew one lamp holder.
3. Lift up the lamp out of the refl ector.
4. Remove the other lamp holder and unplug the wires.
5. Replace the whole refl ector unit.
OPTIONAL (accessories)
- No specific issues.
