iColor Keypad Product Guide
15
►
To set the number of lights per power / data supply:
1.
Click the System Configuration tab on the Settings panel.
2.
Enter a new number (1 – 170) in the Lights per Port box, or use the Up and
Down arrows to select a new number.
3.
Click Save.
Setting the Number of Power / Data Supply Ports
For KiNET version 2 only, the Number of Ports setting in iColor Keypad should equal
the number of power / data supply ports with connected lights. (To ensure optimal
operation, lights should be connected to power / data supply ports in sequence,
starting with port 1 — ports 1 through 5 on an sPDS-480ca, for example.)
►
To set the number of power / data supply ports:
1.
Click the System Configuration tab on the Settings panel.
2.
Enter a new number (1 – 16) in the Number of Ports box, or use the Up and
Down arrows to select a new number.
3.
Click Save.
Restoring Factory Default Settings
You may want to restore the factory default settings for iColor Keypad. Except for IP
address and iColor Keypad name, all saved changes to scenes and system settings are
overwritten with the default settings.
►
To restore the factory default settings:
1.
Select Device > Restore Factory Defaults.
2.
Click Yes to continue and restore default settings.
Saving and Loading Configuration Files
A configuration file (.xml format) contains all scene settings and all configuration
information except for iColor Keypad name and IP address. You can save custom
settings in a configuration file, then use the file to program multiple devices.
►
To save and load a configuration file:
1.
Select File > Save Configuration File to save a keypad’s current settings. Give the
configuration file a name and location, and click OK.
2.
Select File > Load Configuration File to load saved keypad settings. Navigate to a
location containing a valid configuration file, select the file, and click Open.
Updating iColor Keypad Effect Manager Software
iColor Keypad Effect Manager software is periodically updated with new features.
You can check for updates whenever you like, or you can set iColor Keypad Effect
Manager to automatically notify you of available updates.
►
To update iColor Keypad Effect Manager software:
1.
Select Help > Update.
2.
To check for updates now, click Check Now.
E
You can also restore the factory default
settings, including the factory-set IP address,
using the iColor Keypad buttons (iColor
Keypad name is not reset). Press the top two
buttons for three seconds. After the indicator
lights flash, press the OFF button within five
seconds until all indicator lights are off.
E
You can check for and download new
versions of iColor Keypad Effect Manager
software at any time by visiting www.
colorkinetics.com/support/downloads/
