Philips HX8438/01, Manual

Page: 14 / 168

- Follow your country’s rules for the separate collection of electrical
and electronic products and rechargeable batteries. Correct
disposal helps prevent negative consequences for the
environment and human health.
Removing the rechargeable battery
Please note that this process is not reversible.
1 To deplete the battery, repeatedly press the activation button until
the AirFloss no longer produces any bursts of air. (Fig. 20)
2
Remove the AirFloss nozzle from the handle. (Fig. 21)
3 Firmly grab the handle with one hand at the top and one hand on
the bottom. (Fig. 22)
4
Snap the handle into two parts. (Fig. 23)
Note: This step requires a good amount of physical force. The top
and bottom half of the handle should be separated once you snap
the handle.
5 Remove the bottom half of the handle. (Fig. 24)
6 Cut all 6 wires on the internal component with scissors. (Fig. 25)
7 Completely pull apart the internal component from the top part of
the handle. (Fig. 26)
8 The battery is located inside the top half of the handle. Remove
the battery and dispose of it properly (not in household waste).
(Fig. 27)
Warranty and support
If you need information or support, please visit
www.philips.com/support or read the international warranty leaflet.
Warranty restrictions
The terms of the international warranty do not cover the following:
- AirFloss Ultra nozzle
- Damage caused by use of unauthorized replacement parts.
- Damage caused by misuse, abuse, neglect, alterations or
unauthorized repair.
14
English