2
Wrap excess power cord around the gray charger base as shown in
the picture. Be sure to wrap the cord on the inside of the two snap
levers.
3
When you have stored the excess cord, guide the power cord
through the small groove in the rear of the gray charger base.
4
Reattach the charger cover by pressing it down over the charger
base until it snaps into place.
Tip: For extra convenience during travel, you can remove the travel charger and
use it without the charger cover and charger base.
Cord wrap on sanitizer with integrated charger (select models)
1
If your model includes the sanitizer, you can store excess cord using
the cord wrap feature built into the bottom of the sanitizer.
Sanitizing (select models)
- With the UV sanitizer you can clean your brush head after every use.
Unplug the sanitizer, discontinue use and call Consumer Care if
:
- The UV light bulb remains on when the door is open.
- The window is broken or missing from the sanitizer.
- The sanitizer gives off smoke or a burning smell while it is operating.
Note: UV light can be harmful to the human eye and skin. This device should
be kept out of reach of children at all times.
1
After brushing, rinse the brush head and shake off excess water.
Do not place the travel cap on the brush head during sanitization.
2
Place your finger in the door recess on top of the sanitizer and pull
open the door.
ENGLISH
12
