45
English
Radio Operations
Before you start ...
Make sure the FM and AM/MW antennas
are connected.
Tuning to radio stations
A
Press
SOURCE
repeatedly until ‘RADIO
FM’ appears on the display panel (or
press
RADIO
on the remote control.)
B
Press cursor left/right keys briefl y on the
remote control to start tuning.
‘SEARCH > or <’ appears on the
display panel until a radio station with
suffi cient signal strength is found.
C
Repeat step
B
if necessary until you fi nd
the desired radio station.
D
To fi ne-tune the reception of a weak
station, press the cursor up/down keys
briefl y and repeatedly until optimal
reception is found.
E
To switch between FM stereo and FM
mono mode, press
AUDIO
on the
remote control.
Presetting radio stations
You can store up to 40 FM and 20 AM
preset radio stations in the memory.
There are three different ways to
program the radio stations:
– Using auto install (for fi rst time setup
only)
– Using automatic preset
– Using manual preset
Helpful Hints:
– This unit exits presetting mode if no
button is pressed within 20 seconds.
– If no stereo signal is detected or less than
5 (fi ve) stations are detected during radio
installation, ‘CHECK ANTENNA’ appears.
Using auto install
When you access the ‘RADIO’ mode for
the very fi rst time, you will be prompted
to install the radio stations. With this
feature, you can install all the available
radio station automatically with one
touch of button.
RADIO
A
Press
RADIO
.
‘AUTO INSTALL ... PRESS PLAY’
appears.
Summary of Contents for HTS8100 - Soundbar DVD Surround System
Page 57: ...57 English ...
