Philips HTS3355, Service Manual

Page: 13 / 35

3 - 2 3 - 2
Dismantling of the VFD+JACK+VOL+STANDBY Board
1) Loosen 9 screws “J” on the top of control board as shown in 13
Figure 13
Dismantling of the Main Board
1) Loosen 2 screws “ G “ on the top of main board as shown in fi gure10
2) Loosen 7 screws “H” at the back panel as shown in fi gure 11
Figure 10
Figure 11
Figure 12
Dismantling of the Power Board
1) Loosen 4 screws “ I“ on the top of power board as shown in fi gure 12
G
H
I
J
SERVICE POSITIONS
service position A (main unit)
Note:In some service positions the components or copper patterns of one board may risk touching its neighbouring pc boards or
metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
Figure 14
Dismantling of the DVD Module
1) Loosen 4 screws “K” as shown in fi gure 14.
K