16
Sync audio output with video play
1
Press
SURROUND
to switch to multi-
channel surround mode.
2
Press
AUDIO SETUP
.
3
Press
/ until ‘AUDIO SYNC’ is
displayed, then press
OK
.
4
Press
VOL +/-
within 5 seconds to set the
delay time for audio output.
To return to previous step, press
•
BACK
.
To exit the setup, press
•
AUDIO
SETUP
.
Tip
If the volume control is not adjusted within 10
•
seconds, it resumes normal volume control
function.
Set the speaker delay time
1
Press
SURROUND
to switch to multi-
channel surround mode.
2
Press
AUDIO SETUP
.
3
Press
/ to select the speaker for
which you want to set the delay time,
then press
OK
.
‘CENTER DELAY’ - for centre speaker.
»
‘SURROUND DELAY’ - for surround
»
speakers.
‘BACK DELAY’ - for back (rear)
»
speakers.
4
Press
or adjust the volume control to
increase or decrease the delay time, then
press
OK
.
The last volume setting will be
•
stored automatically after 5 seconds
of inactivity.
5
Repeat steps 3 - 4 for other speaker
settings.
To return to previous step, press
•
BACK
.
To exit the setup, press
•
AUDIO
SETUP
.
Note
This setting is only applicable to centre, back
•
and surround speakers.
Set a longer delay time if the centre, back or
•
surround speakers are closer to the listening
position than the front speakers.
Rear and centre delays range from 0 to 15 MS.
•
The default setting is 0 MS.
EN
