13
EN
Bluetooth
•
Bluetooth profiles: A2DP, AVRCP
•
Bluetooth version: 3.0 + EDR
Main unit
•
Power supply: 110-240 V~, 50/60 Hz
•
Power consumption: 20 W
•
Standby power consumption: ≤ 0.5 W
• Speaker impedance: 4 ohm
• Speaker drivers: 2 x racetrack mid range
(1.5" x 5") + 2 x 1" t 1 x 4"
woofer
•
Dimensions (WxHxD):
701 x 68 x 325 mm
•
Weight: 6.3 kg
• Operating temperature and humidity:
0°C to 45°C, 5% to 90% humidity for all
climates
•
Storage temperature and humidity: -40°C
to 70°C, 5% to 95%
Remote control batteries
• 1 x CR2025
Standby information
• When the product remains inactive for
18 minutes, it automatically switches to
standby or networked standby.
• The power consumption in standby or
networked standby is less than 0.5W.
• To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
• To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).
8 Troubleshooting
Warning
•
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the SoundStage do not work.
• Disconnect the SoundStage from the
power supply for a few minutes, then
reconnect.
Sound
No sound from SoundStage speakers.
• Connect the audio cable from your
SoundStage to your TV or other devices.
However, you do not need a separate
audio connection when the SoundStage
and TV are connected through
HDMI ARC
connection.
• Reset your SoundStage to its factory
settings.
• On the remote control, select the correct
audio input.
• Make sure that the SoundStage is not
muted.
Distorted sound or echo.
• If you play audio from the TV through
the SoundStage, make sure that the TV is
muted.
Summary of Contents for HTL4111B
Page 2: ......
