1 Preface
2 Warnings and Cautions
3 Standard Accessories
7 Trouble Shooting
4 Structure Introduction
Thanks for purchasing Audiodynamix Gizmo Ultra portable Bluetooth®
speaker. Please take the time to follow the instructions in this User
manual carefully. If you have any query, please call our national service
hotline: 400-0985-400
1. To reduce the risk of fire or electric shock, be sure the electrical
circuits are not overloaded.
2. To reduce the risk of electronic shock, be sure not plug the adapter
with wet hands.
3. Unplug the power cable if your device is smoking or abnormal and
seek professional help from your nearest service center, be sure not
detach the device yourself.
4. To reduce the risk of fire or electric shock, do not expose this product
to rain or moisture. Liquids can cause a failure and/or a fire hazard.
5. The power cable and audio cable can not be twisted or dragged in
case of short circuit.
6 Operation Steps
How to connect your Gizmo with Bluetooth playback devices?
Step1: Be sure your speaker battery has sufficient power.
Step 2: Turn on your speaker and it will be in Bluetooth mode
automatically and ready for connecting. The blue indicator flashes.. .
Step 3: Open the Bluetooth® of your mobile, search the “Gizmo” device
and connect to it. Usually you needn’t to input password for most of
Bluetooth playback devices, but due to the Bluetooth version varies,
sometimes, you need to input the default password “0000”(four zero) if
required.
Step4: Blue light remains steadily on to indicate successfully
connected.
Step5: Run the music player of your mobile, and enjoy the loud but
clear sound from your Gizmo.
How to switch to connect to other mobile while connecting?
Your Gizmo supports connect to one Bluetooth playback device at the
same time only. You need to disconnect the previous pairing
Bluetooth® device, then other mobiles can be available to connect, and
the operation steps will also be same as before.
How to connect the Gizmo with your notebook pc by Bluetooth®?
1. In the case of your notebook with the Bluetooth® function.
Step1: Start your notebook, search the Bluetooth® device by
“Start—Setting—Control Panel”.
Step2: Start the Bluetooth® searching function of your notebook, blue
light flashes when searching the Audio-in devices.
Step3: Blue indicator light remains steadily on after connecting
successfully.
Step4: You can play the audio music of the notebook by the speaker.
2. In the case of your notebook without Bluetooth® function.
Please buy the Bluetooth® adaptor additionally. After installing please
start the Bluetooth® from the “Control Panel” or the shortcut of your pc
desktop, please search for connecting, and the instruction steps are the
same as the first case.
How to play music by AUX-in?
Step1: Your Gizmo comes with a standard 3.5mm Aux in jack for
connecting with other non-Bluetooth audio devices,eg mobile
phones,mp3/mp4 players.pc. tablet pc and etc.
Plug one end of the audio cable to the AUX in jack of the speaker and
the other end connect to audio source AUX jack.
Step2: Your speaker will disconnect the Bluetooth®, switches to the
external source play, as the external source of AUX-in mode is prior.
How to pair your speaker with two playback devices?
Your Bluetooth speaker support to pair two playback devices at the
same time.just follow the step 1 to pair two playback devices. Please
note the other playback device can not play audio when one playback
device is playing. You need to pause one player if you want to play
music by other device.
6. Do not place any naked flame sources, such as lighted candles, on or
near the apparatus.
Power on/off;
Play/Pause button. In Bluetooth® mode, short press is for Pause.
The button is invalid in the AUX-in mode.
Previous track button. In Bluetooth® mode, short press is for
previous track, long press is for decreasing volume, Note:the
button is invalid in the AUX-in mode.
Next track. In Bluetooth® mode, short press is for next track, long
press is for increasing volume, the button is invalid in the AUX
mode.
Microphone hole.
Bluetooth® disconnect button and Answer/Reject call. In
Bluetooth® mode, press and hold for 3 seconds to disconnect
Bluetooth®. In Bluetooth® mode, short press for 1 second to
answer the call, and long press for 3 seconds for rejecting call. In
Aux mode, short press is invalid and long press for 3 seconds for
switch to the Bluetooth pairing mode.
Micro USB port is for connecting to DC 5V USB cable, to charge
the Bluetooth® speaker. Please take note that power adaptor is not
standard accessory of Bluetooth speaker. You can use your mobile
phone adaptor to charge the speaker or connect to
USB port of your PC /power bank to charge the device. The limited
voltage is 5V.
AUX-in jack. Connect the Gizmo with your pc, MP3/mp4 player,
Tablet, Mobile and other playback devices with 3.5mm jack by
audio cable and Gizmo will disconnect the Bluetooth®
automatically.
Chaging indicator. Red indicator lighted when charging, and off
after fully charged.
Indicator Color
Blue indicator flashes
Blue indicator remains
steadlily on
Low power indicator flashes
Red charging indicator light
Gizmo working status
Status of waiting for connecting
Connected to Bluetooth® source or
connected to aux in devices.
Battery voltage lower than 3.3v, Red light
flashes means your speaker need to be
charged
Red indicator is on when charging, and
off when fully charged.
5 Indicator instruction
8 Specifications
9 Statement
10 Contact us
The Audiodynamix trademark and logo are registered trademarks of
Audiodynamix. All Rights Reserved. All other trademarks, logos or
service marks are the property of their respective owners.
Audiodynamix Gizmo
Your Audiodynamix Gizmo Bluetooth® speaker is covered by a limited
warranty. It is backed by 1 year performance warranty against any
manufacturing defects in material or workmanship from the date of
original purchase. This warranty entitles the purchaser to get the
product repaired or replaced under the following conditions:
◆
The warranty applies to the original purchaser, Proof of original
purchase is required
◆
The warranty does not cover the damage caused by misuse, abuse or
improper storage.
◆
In no event shall Audiodynamix be responsible for any direct,
incidental, consequential or other damages of any kind.
Limited Warranty
Product specification
Channel
Amplifier
Speaker
Size
Weight
Technical Parameters
RMS
Bluetooth® chipset
Bluetooth® version
Supported protocol and profile
Working current
Working voltage
Sensitivity
S/N
Distortion
1.0Channel
Digital Amplifier
Full range Φ45mm 2Ω
L64.5 x W64.5x H70.1mm 64.5 mm
261g
5W
CSR
V4.0
A2DP
、
AVRCP
、
HFE
、
HFP
Max≤350mA
3.3V-4.2V
80db
≥80 db
≤0.3%
Frequency response
Working temperature
DC output
Battery
90Hz-20KHz
-10
℃～
50
℃
DC 5V
Built-in 500mA battery
Speaker will not turn on?
●
Make sure your speaker battery has sufficient power.
Paired Bluetooth device will not connect?
●
If your device requires a pass code, make sure to input “0000”four
zero.
●
Turn the Gizmo speaker off and back on
●
Remove the Gizmo speaker from the pairing list on your Bluetooth
device pairing list (consult the device owner’s manual for
assistance).Then pair the device and the speaker again.
Speaker indicates a connection, but it not playing music?
●
Turn off or disable Bluetooth on all other paired devices nearby and
reconnect the device you want to listen
●
Turn the Gizmo speaker off and back on
Can not pair the Gizmo with my Bluetooth device ?
●
Make sure your speaker is discoverable
●
Your Bluetooth device maybe out of range-try to move closer to
your speaker
●
Make sure your Bluetooth device supports the transfer of audio
●
Reset your Bluetooth speaker
No audio from a Bluetooth device?
●
Make sure your Gizmo is not muted and the volume is up.
●
Make sure your Bluetooth device is playing audio and volume is up
●
Your Bluetooth device may be out of range, move closer and try
●
Turn your Bluetooth speaker off and back on
Poor sound quality from a Bluetooth device?
●
Your Bluetooth device may be out of range, move closer and try
again
●
Move your Bluetooth device and /or Gizmo speaker from any device
that generates electromagnetic interference, such as another
Bluetooth device, cordless phone, microwave oven or wireless router.
●
Try to turning off WIFI to improve audio quality
●
Make sure your music file is not poor quality.
●
Turn your Bluetooth speaker off and back on.
No Audio from AUX source?
●
Make sure your connected device is on and playing
●
Make sure you speaker is in AUX in mode
●
Make sure the audio cable is correctly inserted
●
Increase the volume level on the device and speaker
Poor sound quality from AUX source?
●
Reduce the volume level on the AUX source
●
Make sure the 3.5mm audio cable is fully inserted into the speaker
and device.
●
Make sure your audio source and music file is not of poor quality
Note:
1
、
Your speaker will power off automatically within 15 minutes if you did not pair it
with playback devices in order to save energy. You need to power on speaker again
when use.
2
、
Bluetooth® compatibility note: Gizmo can be compatible with most of Bluetooth®
devices with the different brands and models, but some individual Bluetooth®
devices may have compatibility problem with the Gizmo. If youz need further
assistance, please contact our technical customer service: 0086-755-83222871.
3.If your speaker paired with over 8 playback devices already. There will be 2 or more
seconds delay for scanning and pair with new playback devices. Because your
speaker need to scan the previous paired devices firstly to re-pair with them
automatically. Simply to hold the previous track and next track button at the same
time for 3 seconds to clean all the memory devices and resume default settings.
8
9
1
2
3
4
5
6
7
5
6
1
8
3
2
4
9
7
Gizmo Bluetooth® speaker
Micro USB charging cable
3.5mm Audio cable
User Manual
x 1 unit
x 1 unit
x 1 pc
1 pc
Gizmo User Manual
Gizmo User Manual
展开尺寸：632x79mm 折合尺寸：79x79mm
U150英国AudioDynamix说明书
85g双铜纸 黑白印刷
此页面朝上
A
A
Email: [email protected]
Website: www.audiodynamix.co.uk
Struggling to read the Manual?
for an easy to read PDF please visit our
website:
www.audiodynamix.co.uk
and select ‘
Support
’ followed by
‘
User manual
’ or email:
ADX
