The appliance will only function if the jug and the lid have been
properly mounted onto the motor unit.
C
3
Put the pieces in the chute and press them gently down with
the pusher.
Do not exert too much pressure on the pusher; this could affect the
quality of the end result and it could even cause the sieve to come to a
halt.
Never put your fingers or an object in the chute.
4
When the flow of juice into the jug has stopped, switch the
appliance off and wait until the sieve has stopped rotating
completely.
Do not fill the jug beyond the MAX indication to prevent juice from
being spilt. If you want to extract a large quantity of juice, empty the jug
at a certain point during the process.
Do not let the appliance run for more than two minutes without
interruption. If you have not finished extracting juice, switch the
appliance off and allow it to cool down for two minutes before you
continue.
C
5
Pour out the juice.
It is not necessary to disassemble the juice extractor.
If the pulp container is full:
1
Switch the appliance off and wait until the sieve has stopped
rotating completely.
2
Empty the pulp container.
3
Reassemble the juice extractor and continue.
Cleaning
◗
Switch the appliance off and remove the plug from the wall socket
before you start cleaning the appliance.
◗
Do not use abrasive cleaning agents, scourers, wire wool, acetone,
alcohol etc. to clean the appliance.
1
Remove the parts from the motor unit.
2
Clean the parts that have been in contact with food in warm
soapy water immediately after use and rinse them with warm
water.
Do not clean any of the parts in the dishwasher.
ENGLISH
6
Summary of Contents for HR2828
Page 1: ...HR2828 ...