ENGLISH
19
3
Loosen the front panel control knobs.
Note:
•
The front panel is heavy. Take extra caution
when removing it.
4
Disassemble the front panel, the shaping disc, the shaping disc holder,
the mixing paddle, and the mixing chamber in order.
5
Use a dry cloth to clean flour residue in
the hole
❶
where the mixing paddle is
placed.
6
Clean the shaping disc with the supplied
cleaning tool to remove the dough
residues. After that, you can clean it with
water.
Tip:
•
For the spaghetti and fettuccine shaping discs, put the shaping disc
into the freezer for 2 hours. Then use the corresponding cleaning tool
to poke out the dough in the holes.
2
3
4
5
1
1
Summary of Contents for HR2357/06
