C
◗
To separate the foam from the juice when pouring the juice into a
glass, insert the foam separator by sliding it into the juice jug.
Note: If you want your drink to have a foamy layer, do not use the
foam separator!
Using the appliance
The appliance will only function if all parts have been properly
assembled and the lid has been properly locked in place with the
clamps.
C
1
Wash the fruit and/or vegetables and cut them into pieces that
fit into the feeding tube.
2
Make sure the juice jug has been placed under the spout.
C
3
Switch the appliance on by turning the control knob to setting
1 (low speed ) or 2 (normal speed).
- Speed 1 is especially suitable for soft fruits and vegetables such as
watermelons, grapes, tomatoes, cucumbers and raspberries.
- speed 2 is suitable for all kinds of fruits and vegetables.
C
4
Put the pre-cut pieces in the feeding tube and gently press
them down towards the rotating filter by means of the pusher.
Do not exert too much pressure on the pusher, as this could affect the
quality of the end result and it could even cause the filter to come to a
halt.
Never insert your fingers or an object into the feeding tube.
After you have processed all ingredients and the juice flow has
stopped, switch the appliance off and wait until the filter has stopped
rotating.
Tips
- Use fresh fruit and vegetables, as they contain more juice. Pineapples,
beetroots, celery stalks, apples, cucumbers, carrots, spinach, melons,
tomatoes, pomegranates, oranges and grapes are particularly suitable
for processing in the juice extractor.
- You don't have to remove thin peels or skins. Only thick peels, e.g.
those of oranges, pineapples and uncooked beetroots need to be
ENGLISH
9
1
2
Summary of Contents for HR1861 Aluminium Collection
