Philips HR1861 Aluminium Collection, Instructions For Use Manual

Page: 6 / 150

Introduction
Your new juicer has a special, slightly tilted design that leans 5
c
to the
side of the juice outflow opening to ensure maximum juice output.
General description
A
Pusher
B
Feeding tube
C
Lid
D
Filter
E
Juice collector
F
Pulp container
G
Clamps
H
Control knob
I
Driving shaft
J
Motor unit
K
Cord storage
L
Juice jug lid
M
Foam separator
N
Juice jug
O
Cleaning brush
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗
Check if the voltage indicated on the base of the appliance
corresponds to the local mains voltage before you connect the
appliance.
◗
Do not use the appliance when the mains cord, the plug or other
components are damaged.
◗
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗
This appliance is intended for household use only.
◗
Keep the appliance out of the reach of children.
◗
Never let the appliance operate unattended.
◗
Never use accessories or parts made by other manufacturers or
that have not been specifically recommended by Philips.Your
guarantee will become invalid if you use such parts or accessories.
◗
Check the filter every time you want to use the appliance. If you
detect any cracks or damage, do not use the appliance and
contact the nearest Philips service centre.
◗
Make sure all parts are correctly mounted before you switch on
the appliance.
◗
Only use the appliance when both clamps are locked.
◗
Do not operate the juicer for more than 40 seconds at a time
when juicing heavy loads and let it cool down sufficiently
afterwards.
ENGLISH
6