Philips HR1368, Manual

Page: 9 / 196

Preparing for use
There are two ways to install the charger:
1 Mount the charger on the wall, close to a socket. (Fig. )
Place the charger on the worktop.
Charging
Charge the hand blender:
before you use the appliance for the first time, or
when the blue charging light flashes to indicate that the batteries
are low.
1 Put the adapter in the wall socket.
Put the motor unit in the charger. (Fig. )
The blue charging light slowly flashes to indicate that the appliance
is charging (Fig. ).
Note: The adapter feels warm during charging. This is normal.
It takes 4 hours to fully charge the appliance.
Charge the appliance for at least 15 minutes to use it for a light
blending job (soup, puree).
Do not charge the appliance for more than hours.
You can place the blender bar in the charger next to the motor
unit. (Fig. 5)
light indications
Charging
When the appliance is charging, the blue charging light flashes slowly.
Batteries fully charged
When the batteries are fully charged, the charging light lights up blue
continuously.
Batteries low
When the batteries are low, the blue charging light flashes. The lower
the energy level in the batteries, the faster the charging light flashes.
-
-
,
-
-
-
-
-
EnglisH
9