Philips HQ915, Guidance

Page: 22 / 36

1
Switch off the shaver, remove the adapter
from the wall socket and pull the appliance
plug out of the shaver.
2
Press the release button and pull the shaving
unit off the shaver (Fig. 10).
3
Turn the orange wheel anticlockwise (1) and
remove the retaining frame (2) (Fig. 14).
4
Remove the shaving heads from the shaving
unit one by one (Fig. 15).
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and guards,
it may take several weeks before optimal shaving
performance is restored.
5
Remove the guard from the cutter (Fig. 16).
6
Clean the cutter with the short-bristled side
of the brush. Brush carefully in the direction
of the arrows (Fig. 17).
7
Clean the guard with the brush (Fig. 18).
8
Put the shaving heads back into the shaving
unit.
English
9
Put the retaining frame back into the shaving
unit and turn the orange wheel clockwise.
10
Put the shaving unit back onto the shaver.
storage
Put the protection cap on the shaver after use
to prevent damage to the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap
covers the release button.
Replacement
Replace the shaving heads every two years for
optimal shaving results.
Replace damaged or worn shaving heads with
Philips HQ56 shaving heads.
For instructions on how to remove the shaving
heads, see section ‘Every two months: shaving
heads’ in chapter ‘Cleaning’.
Environment
Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an official collection point for
-
-
English
21
English
HQ915_55*99_CS2_0906.indd 21 12.9.6 7:36:29 PM