Note: Water may leak from the socket at the bottom of
the appliance when you rinse it. This is normal and not
dangerous.
Cleaning the shaving unit under the tap
1
Switch off the shaver and disconnect it from
the mains.
2
Press the release button to open the shaving
unit.
3
Rinse the shaving unit and hair chamber under
a hot tap for some time.
Make sure that you clean the inside as well as the
outside of the shaving unit.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
4
Close the shaving unit and shake off excess
water.
Never dry the shaving unit and the hair chamber
with a towel or tissue, as this may damage the
shaving heads and the coupling spindles.
5
Open the shaving unit again and leave it open
to let the shaver dry completely.
-
EnglisH
11
Summary of Contents for HQ8200
Page 243: ...245 ...
Page 244: ...4222 002 4988 1 246 ...
