Philips HQ7890/22, Manual

Page: 12 / 208

Cleaning the shaver under the tap
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1 Switch off the shaver, remove the adapter from the wall socket and
pull the appliance plug out of the shaver.
2 Press the release button to open the shaving unit (Fig. 24).
3 Rinse the hair chamber and the inside of the shaving unit under a
hot tap for some time (Fig. 25).
4 Rinse the outside of the shaving unit under a hot tap for some
time (Fig. 26).
5 Close the shaving unit and shake off excess water.
Never dry the shaving unit with a towel or tissue, as this may damage
the shaving heads.
6 Open the shaving unit again and leave it open to let the shaver dry
completely (Fig. 27).
You can also clean the hair chamber without water with the brush supplied.
Extra-thorough cleaning method
1 Switch off the shaver, remove the adapter from the wall socket and
pull the appliance plug out of the shaver.
2 Open the shaving unit, turn the lock anticlockwise (1) and remove
the retaining frame (2) (Fig. 28).
3 Clean the cutters and guards with the brush supplied (Fig. 29).
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving performance is restored.
4 Put the shaving heads back into the shaving unit. Put the retaining
frame back into the shaving unit and turn the lock
clockwise (Fig. 30).
5 Close the shaving unit.
EnglisH
12