Philips HQ7890/22, Manual

Page: 11 / 208

,
During the first phase of the cleaning program, the shaver automatically
switches on and off several times and is put in different positions.
,
During the second phase of the cleaning program, the shaver is
placed in the drying position. It stays in this position until the end
of the program. The cleaning light lights up continuously.
,
After the cleaning program, the shaver automatically returns to its
starting position and starts charging. The charging light on the
Jet Clean system flashes.
Note: If you press the start button or open the lever during cleaning, the
cleaning program is aborted and reset. In this case, the cleaning light stops
flashing and the holder returns to its starting position.
Note: If the adapter is removed from the wall socket during cleaning, the
cleaning program is aborted. The holder remains in its current position.
When the adapter is put back into the wall socket, the holder moves to
the highest position.
Note: If the fluid volume in the cleaning chamber drops below the minimum
level during the cleaning program, the program is aborted. The cleaning
light flashes with intervals and the holder returns to its starting position.
Cleaning the Jet Clean system
The cleaning chamber is not dishwasher-proof.
Clean the cleaning chamber every two weeks.
1 Simultaneously press the buttons on both sides of the Jet Clean
system (1) and lift the Jet Clean system off the cleaning chamber
(2). (Fig. 20)
The cleaning chamber remains behind.
2 Pour any remaining cleaning fluid out of the cleaning
chamber. (Fig. 21)
You can simply pour the cleaning fluid down the sink.
3 Rinse the cleaning chamber under the tap (Fig. 22).
4 Place the Jet Clean system back onto the cleaning chamber (Fig. 23).
Make sure the release buttons snap back into place.
5 Clean the Jet Clean system with a moist cloth.
EnglisH
11