Philips HQ664/17, User Manual

Page: 11 / 84

C
◗
Remove the hairs from the cutters and guards
with the brush supplied.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it
could take several weeks before optimal shaving
performance is restored.
◗
Put the shaving heads back into the shaving unit.
Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
B
Cause 3: the shaving heads are damaged or worn.
◗
Remove the retaining frame.
◗
Remove the old shaving heads from the
shaving unit and replace them with new ones.
Damaged or worn shaving heads (cutters and
guards) must only be replaced with original HQ6
Philishave Quadra shaving heads.
◗
Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
2 The shaver does not work when the on/off
button is pressed.
B
Cause: the shaver is connected to the mains.
◗
Disconnect the shaver from the mains.
B
Cause: the battery is empty.
◗
Recharge the battery. See chapter 'Charging'.
ENGLISH
13