Philips HP6572/00, User Manual

Page: 13 / 40

Problem Cause Solution
The overheat
protection has been
activated.
When the epilator stops working and the speed
setting indications start flashing red, the overheat
protection has been activated. Let the appliance cool
down. The lights stop flashing after 30 seconds. When
the appliance has cooled down, switch on the epilator
again. If the lights start flashing again, the epilator has
not yet cooled down sufficiently.
The overload
protection is
activated because
something got
caught between the
rotating tweezers or
because you pressed
the appliance too
hard onto your skin.
When the overload protection has been activated, the
speed setting indications flash red. Turn the tweezers
with your thumb until you can easily remove the
item that is blocking the rotating tweezers. Then
switch on the appliance again. Do not press the
appliance too hard onto your skin.
EnglisH
13
4203.000.4532.1.indd 13 08-12-09 12:31