Philips HP6446, User Manual

Page: 16 / 90

Press the ribbed sections and slide the epilating
head (D) off the appliance in the direction of the
arrow.
3 Slide the pain softener (E) off the
appliance.
C
4 Detach the type plate located under the
epilating head (D) from the appliance by
means of a screwdriver.
C
5 Hold the appliance between your hands
with your thumbs on each side of the
parting line at the top of the appliance.
6 Pull the two housing halves apart with
your thumbs until the snap connections
break.
7 Remove all the components (motor unit
and the battery-printed circuit board unit)
from the housing halves.
8 Take the battery-printed circuit board unit
in your hand with the printed circuit
pointing towards you.
C
9 Insert a screwdriver at right angles
between the printed circuit board and the
batteries.
10 Break the printed circuit board in two,
using the screwdriver as a lever.
ENGLISH
16